?> Dynamic Designer Motion - 3D Dynamic Motion embedded in Inventor - Engineering Simulation Software

Dynamic Designer Motion

Motion Simulation embedded in Inventor

nifty image

See assembly motion and check for interferences.

Simply Motion is a subset of both Motion and Motion Professional. It adds motion to your Inventor assembly, generates animations, and checks for interference as your parts move. The designs can contain components like linkages, motors, actuators, and springs. Simply Motion should be used by designers who only need to visually verify the motion of their moving assembly, who need to check for interference as the parts move, and who are not concerned with the forces (e.g. friction, dampers, etc.) that act on their design. Using Simply Motion is typically as simple as adding an actuator (e.g. motor) to the existing assembly model. If you need to model more complicated mechanical components (cams, gears, latches, chains, belts, etc.) and/or use the underlying engineering data (displacements, velocities, accelerations, forces) to make design decisions, you should consider either Motion or Motion Professional.

How to use Dynamic Designer Simply Motion 

Product Applications

Mechanism Animation

Animations are fundamental to understand the functional performance of a mechanism. Consequently, all Dynamic Designer products support this feature. You will animate mechanisms based on the assembly constraints, any additional constraints, and the actuators you put in the model. A VCR-type interface provides complete and intuitive animation control. Animations are ideally suited to visualize the physical motion of your mechanism. In addition to seeing the motion you can save it to an AVI (movie) or a VRML (3D animated web format) file. If you are interested in making engineering decisions based on the motion, you will need the engineering data (forces, displacements, velocities, accelerations) available in Motion or Motion Professional.

Moving Interference Detection

Have you ever build a mechanism containing interfering parts? With Dynamic Designer products you can eliminate interferences before you build the physical hardware. With Dynamic Designer you will check for interferences between parts as the mechanism moves through the real operating range, find the first point of interference, or calculate the minimum distance between parts. An intuitive interference browser lists all steps containing part interferences and selecting an interference highlights it in the model.

Motion Builder

Motion Builder technology helps automate the motion simulation process making it available to even the most causal user. The Intellimotion builder is a wizard that helps you quickly build motion models. It logically takes you through each step, asking key questions and gathering information as it generates the motion model. The resulting model is ready to put into motion and see the results.

Motion Browser

Motion Browser technology helps automate the motion simulation process making it available to even the most causal user. There are two ways to interact with Dynamic Designer Products: through a pull down menu and through the Intellimotion browser. The browser is a seamless extension of CAD tree tools. All Dynamic Designer functionality is available through the tree browser including motion model construction, simulation, and result viewing.


Company News

SimWise Motion Integrated with IronCAD. Read the press release »

DST Announces SimWise V9.8. Read the press release »

SimWise integrated with The Mathwork's Simscape Multibody. Watch the video »

Design Simulation Technologies 43311 Joy Road, #237 Canton, MI 48187 USA

Toll Free: (800)-766-6615

Phone: +1-(734)-446-6935

Fax: +1-(734)-259-4207


Sales Inquiries - Direct Line

Phone: +1-(415)-775-1020